Sign In | Join Free | My himfr.com
Home > Switch Life Tester >

Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers
     
    Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers
    • Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers
    • Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers
    • Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers
    • Buy cheap Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 from wholesalers

    Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN2128-3
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : T/T
    Supply Ability : 10 Sets Per Month
    Delivery Time : 30 Days
    • Product Details
    • Company Profile

    Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884


    Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884


    Product information:


    Standard: IEC 60884-1:2022 clause 24.8 figure 31, BS1363-1: 2012 figure 9.


    Specimen and limitations: Insulating sleeve for plug pin.


    Test purpose: Suitable for testing the wear resistance of plug insulation sleeves


    Test principle: The motor drives the eccentric mechanism to achieve reciprocating scraping of the latch sheath.


    Structure:


    It consists of a horizontally placed crossbeam and a linearly moving clamp base. The end of the crossbeam is equipped with a U-shaped head bent from a short steel wire with a diameter of 1mm (two points of the U-shape are vertically fixed on the crossbeam). The bottom edge of the U-shaped steel wire is 6mm straight working part. The 6mm straight bottom edge of the U-shaped steel wire is pressed on the latch insulation sleeve, and the motor drives the fixture seat equipped with the latch to reciprocate back and forth, so that the steel wire rubs against the latch insulation sample for testing.
    The equipment adopts a 3-station synchronous structure, as shown below:



    Technical parameters:


    Test stationThree stations, synchronous
    Drive modeElectrical mode
    Abrasion rate

    30 times/minute, one for each of going and returning

    Test times0-999999 times, adjustable
    Pressure load4N
    Scraping wire

    Φ1mm, effective length 6mm

    Test strokeMore than 1 meter, fixed stroke
    Angle adjustment mechanism

    The fixture is equipped with an angle adjustment mechanism, matching European standard internal eight-shaped pins and conventional straight pins. It is equipped with a 10° inclination gauge. After the specimen is installed, the gauge can be used to directly calibrate the 10° position.

    Power supplyAC220V±10%/50-60Hz
    Equipment sizeWDH=850X760X600mm
    Equipment weightAbout 130kg


    Quality Three Station Plug Insulation Sleeve Abrasion Test Apparatus Pressure Load 4N IEC 60884 for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)