Home > Flammability Test Chamber >

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

Ask Lasest Price
Brand Name :	Sinuo
Model Number :	SN775A
Certification :	Calibration Certificate (Cost Additional)
Price :	Negotiable
Payment Terms :	T/T
Supply Ability :	10 Sets Per Month
Delivery Time :	30 days

Add to Cart

Product Details
Company Profile

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable with PLC Control

Product information:

The single insulated wire vertical flammability test apparatus is designed and manufactured according to the standards IEC60332-1-2, IEC60332-1-1, IEC60695-11-2, IEC60332-1-3 and customized requirements, and is used to test single wire and cable or optical cable products vertical burning test to determine the burning characteristics of its insulating materials.

The test system adopts PLC control, 7-inch color touch screen operation, with infrared remote control operation function. The equipment adopts the integral air intake automatic ignition system, and the combustion delay is only 0.1 second to ensure the full combustion of the gas, and it can be automatically closed according to the set combustion time, which can further carry out the flame vertical spread test. The burning time can be set through the touch screen, and the flame height and calorific value can be calibrated through the gauge and temperature rise measurement system. The equipment is easy to operate and has a friendly interface. It is the first choice for reliable equipment for third-party testing agencies and factory laboratory departments.

Structure:

The equipment adopts Mitsubishi PLC control, 7-inch color touch screen operation, and infrared remote control dual operation.

It adopts the blowtorch required by GB/T5169.14-2017 Appendix A/IEC60695-11-2: 2017 Annex A, as well as the propane and air dual gas supply pipelines required by the standard, and is equipped with a temperature measurement system (0.5mm imported thermocouple + A. 7 Temperature measuring copper head + temperature rise time record). Make the adjusted flame (blue flame core height 46-78mm, total outer flame height 148~208mm) match the temperature measuring copper block at 100±5°C~700±3℃ and controlled within 46±6s.

The PLC control system automatically controls the fire supply time, and automatically extinguishes when the set time is reached. Both touch screen buttons and remote control can be operated to record the process time of filter paper ignition and combustion stop. The distance between the upper and lower starting points of carbonization and the lower edge of the upper support is measured by the operator (marking can be in advance and removed for measurement).

Technical parameters:

Working voltage	AC 230V/50Hz
Metal cover size	300±2 mm W× 450mm±2 mm D×1200mm±2 mm H
Dimensions (mm)	1250mm W× 700mm D×1800mm H
Workpiece to be inspected	Small-sized single wire and cable with a total cross-sectional area of not less than 0.5m² (excluding thin optical cables) Length: 600±25㎜, need to be pretreated according to the temperature and humidity environment required by the standard.
Test items	Single wire and cable vertical burning test
Test station	Single
Electrical control method	PLC intelligent integrated control, 7-inch touch interface operation, dual operation with infrared remote control.
Function selection	Divided into manual operation and automatic operation test mode.
Blowtorch Standard	1kw pre-mixing blowtorch, complies with GB/T5169.14-2017 Appendix A/IEC60695-11-2:2017 Annex A, burner opening Φ7±0.05mm, made of brass.
Ignition method	Auto ignition.
Gas flow and gas source type	Mixed gas: 650±10ml/min propane, 10±0.3L/min air, double flow meter adjustment.
Gas pressure	0.1mpa, adjusted by the pressure regulating valve, displayed on the pressure gauge (range 0-1mpa).
Fire supply time	0-9999X0.1S, can be set and displayed.
Filter paper ignition and extinction time	0-9999X0.1S, can be displayed
Burning angle	Tilt 45°±2°, adjustable
Test flame calibration	Temperature measuring copper head: 500W: Ф9mm±0.01mm, 10±0.05g before drilling
	Thermocouple: U.S. original Omega φ0.5 armored nickel-chromium/nickel-aluminum wire, type K, temperature resistance 1100°
	Distance between Bunsen burner port and temperature measuring copper block: 95±1 mm
	Flame height: blue flame core height 46-78mm, outer flame total height 148~208mm
	The heating time from 100±5°C to 700°±3°C is 46±6s
	Heating time: 0-9999X0.1S, measured and displayed on the touch screen
	Temperature measuring copper head mounting bracket: rotatable, rotate to the box wall when not measuring
Sample installation	Fixed sample horizontal support: two upper and lower supports, the distance between the lower edge of the upper support and the upper edge of the lower support is 550±5mm
	The sample is installed on the upper and lower brackets (the middle of the metal cover, that is, 150mm from both sides and 225mm from the back), and about 50mm from the bottom of the box
	A weight of 5N/mm² is configured for the sample that undergoes significant displacement during the test (by superimposing weights)
Tray	Non-metallic Bakelite base, can be drawn out
Gauges, filter paper	Configure a set of flame height gauges (blue flame core height 46-78mm, total outer flame height 148~208mm), a temperature measuring distance gauge (95±1 mm), a distance gauge from the sample (100mm), 100 pieces of filter paper (300×300±10mm, quantitative 80±15g/m² ash content less than 0.1% undyed fiber filter paper)
Gas	1. >95% propane gas; 2. Oil-free and water-free air
Sample result evaluation	1. Measurement of carbonized part 2. Whether the filter paper is ignited 3. The time from when the filter paper is ignited to when the burning stops
Lighting	Configure 12W led spotlight
Safety protection	1. Strong exhaust fan with baffle structure, the exhaust will be turned on automatically when the test is over or an alarm is given. 2. Equipped with a smoke detector to detect smoke leakage 3. With activated carbon bag to filter waste gas

Product Tags:


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Flammability Test Chamber products from this supplier

Find Similar Products By Category:

Manufacturing & Processing Machinery

Hot Searches:

Sinuo Testing Equipment Co. , Limited

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control

IEC 60332 Vertical Flame Propagation Tester

PLC Control Vertical Flame Propagation Tester

IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control