Sign In | Join Free | My himfr.com
Home > Led Testing Equipment >

IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers
     
    Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers
    • Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers
    • Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers
    • Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers
    • Buy cheap IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test from wholesalers

    IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN1112F
    Certification : Calibration Certificate (Cost Additional)
    Price : Negotiable
    Payment Terms : T/T
    Supply Ability : 20 Sets Per Month
    Delivery Time : 30 Days
    • Product Details
    • Company Profile

    IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test


    IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test


    Product Information:


    Standard: Clause 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC 60598-1 Article 4.14.3.

    Application: It is used to test the bending resistance of the power cord of household appliances when it enters the appliance, and to verify its reliability. The purpose of verifying that the luminaire regulating device does not stress, pinch, damage or twist the cord or cable more than 360° along the longitudinal axis during normal operation is to verify its interference with the cord or cable.

    Test sample: Household appliances with power supply cords (such as electric irons) or household appliances with relative motion that need to be moved during work; hand-held electric tools; bracket or extension tube


    Technical Parameters:


    Input PowerSingle phase AC220V, 60Hz
    Control MethodPLC control, touch screen operation
    StationOne
    Drive ModeServo motor drive
    Sample clamping method

    Mechanical clamping, adjustable clamping point position, two clamping methods

    Method 1 (IEC60335-1 Section 25.14):


    Method 2 (IEC60335-1 Article 23.3 and IEC60598-1 Article 4.14.3):

    Flexing Angle0-360°, preset on the touch screen
    Choice of bending direction
    Flexing Speed0-60 cycles/min, can be preset
    Test Cycles0-999999, can be preset
    Loading Weight5N,10N,20N
    Loading Voltage0-250V, can be adjusted
    Sample judgmentJudge the conduction by current

    Common Faults and Treatments:


    No.FaultReasonTreatment

    1

    Turn on the “Power” switch, but the indicator light not turn onThe external power supply is not connectedPlease connect to the external power supply
    The fuse is brokenFind out the reason and change the fuse.
    The indicator light damagedReplace the light

    2

    Turn on the “Power” switch, Touchscreen not workThe internal DC24V power supply is in problemReplace the DC24V power supply
    Touchscreen damagedReplace the touchscreen
    3Touchscreen no responseConnection to PLC looseReconnect
    Touchscreen damagedReplace the touchscreen
    4Load power no power supplyLoad socket damagedReplace the socket
    The fuse is brokenChange the fuse

    5


    Press down “Start” button, but the manipulators do not work.

    The display value and preset value of test times are the samePress “Count Cleared” button
    The E-STOP button is not resetRelease E-STOP button
    There is foreign object in the machine, the machinery is stuckRemove the foreign object
    It is not under auto test modePress “Start” button
    Connection to motor loosenReconnect
    Not in starting positionHoming
    6NoiseSwivel speed low or too highReset the speed
    Connection to motor loosenReconnect

    IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test


    IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test


    Quality IEC 60598-1 Article 4.14.3 Power Cord Flexibility Test Equipment Bending Resistance Test for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)