Sign In | Join Free | My himfr.com
Home > Led Testing Equipment >

IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers
     
    Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers
    • Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers
    • Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers
    • Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers
    • Buy cheap IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment from wholesalers

    IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment

    Ask Lasest Price
    Brand Name : Figure 25
    Model Number : SN2123B1M
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : L/C, , T/T, Western Union, MoneyGram
    Supply Ability : 100 sets per month
    Delivery Time : 10 Days
    • Product Details
    • Company Profile

    IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment


    High Quality Tumbling Barrel Drop Test Machine /Rolling Drop Tester IEC60320-1


    Overview

    This tumbling barrel test apparatus conforms to the standard requirements of IEC 60598-1 clause 4.13.6, figure 25. This device is suitable for checking whether plug-ballast / transformers and mains socket-outlet-mounted luminaires have adequate mechanical strength.

    The tumbling barrel part of this test apparatus fully meets the requirements of IEC60598-1 figure 25, the test times can be preset, the test apparatus will automatically stop when the set test times completed, the whole operation of this test apparatus is easy.


    Technical parameters

    Tumbling Barrel rotation speed5rpm (default before factory)
    Fall frequency10 time per min
    Material3mm high quality steel plate
    Test times0~9999 can be preset
    Fall height500 mm
    Barrel width1000 mm (in order to be compatible with user’s big specimens)
    Barrel numberSingle
    ApplicationPlug-ballast/transformers and mains socket-outlet-mounted luminaires
    StandardsIEC 60598-1 clause 4.13.6, figure 25
    Power supply220V,50Hz

    3 Test procedures and operation steps (Extracted from IEC 60598-1 clause 4.13.6)

    Plug-ballast/transformers and mains socket-outlet-mounted luminaires shall have adequate mechanical strength.
    Compliance is checked by the following test, which is made in a tumbling barrel as shown in Figure 25.
    The barrel is turned at a rate of five revolutions per minute, ten falls per minute thus taking place.
    The sample falls from a height of 50 cm onto a steel plate 3 mm thick, the number of falls being:
    – 50 if the mass of the sample does not exceed 250 g;
    – 25 if the mass of the sample exceeds 250 g.
    After the test, the sample shall show no damage within the sense of this standard, but it need not be operative and any damage to the glass bulb shall be ignored. Provided that the protection against electric shock is not affected, small pieces which may have broken off the
    sample are ignored.
    Distortion of pins and damage to the finish and small dents which do not reduce the creepage distances or clearances below the values specified in Section 11 are ignored.


    Quality IEC 60598-1 Tumbling Barrel For LED Lamp Drop Testing Equipment for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)