Sign In | Join Free | My himfr.com
Home > Switch Life Tester >

IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers
     
    Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers
    • Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers
    • Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers
    • Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers
    • Buy cheap IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings from wholesalers

    IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN2210-7
    Certification : Calibration Certificate (Cost Additional)
    Price : Negotiable
    Payment Terms : L/C, T/T, Western Union, MoneyGram
    Supply Ability : 100 sets per month
    Delivery Time : 3 Days
    • Product Details
    • Company Profile

    IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings


    IEC 61032 Figure 7 Test Probe 11


    IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings

    Product Overview:

    This probe conforms to the standard requirements of IEC61032 fig.7 test probe 11, IEC 60065:2014 clause 9.1.7, etc. This probe may be used to verify the protection of persons against access to hazardous parts and to verify the mechanical strength of openings in the enclosure of internal barriers.


    Probe Dimension:

    Probe Tip Length (mm)20 0 -0.05
    Probe Tip Cylindrical Radius (mm)R2±0.05
    Probe Tip Spherical Radius (mm)R4±0.05
    Probe Tip Cylindrical Angle (°)37o 0 -10’
    Probe Tip Spherical Angle (°)14 o 0 -10’
    Probe Diameter (mm)Ф12 0 -0.05
    Probe Length with Tip (mm)80±0.2
    Probe MaterialStainless Steel
    Guard Diameter (mm)Ф50
    Guard Thickness (mm)5±0.5
    Handle MaterialNylon
    Handle Length (mm)100
    Operation:

    Please refer to the relevant standards.

    Take IEC 60065:2014 clause 9.1.7 as an example:

    The enclosure of the apparatus shall be sufficiently resistant to external forces. Compliance is checked by the following tests:

    by means of a rigid test finger according to IEC 61032:1997, test probe 11, a force of

    50 N ± 5 N, directed inwards, is applied for 10 s to different points of the enclosure

    including openings and textile coverings.

    The force shall be so exerted by the tip of the test finger as to avoid wedge or lever action.

    During the test, the enclosure shall not become HAZARDOUS LIVE, HAZARDOUS LIVE parts

    shall not become ACCESSIBLE, textile coverings shall not touch HAZARDOUS LIVE parts.


    The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:


    Quality IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)