Sign In | Join Free | My himfr.com
Home > Electrical Appliance Testing Equipment >

1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers
     
    Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers
    • Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers
    • Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers
    • Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers
    • Buy cheap 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer from wholesalers

    1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN2210-51
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : L/C, , T/T, Western Union, MoneyGram
    Supply Ability : 100 sets per month
    Delivery Time : 3 Days
    • Product Details
    • Company Profile

    1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer


    IEC 60335-2-25 35N 65N 90N Spring Dynamometer with 1.05N/mm Spring Constant


    Product Overview:


    The spring dynamometer conforms to IEC 60335-2-25 clause 21.101. It is used to apply required force during microwave oven mechanical strength test.


    Technical Parameters:


    Spring constant1.05N/mm
    Force applied faceФ10mm
    Force applied range35N, 65N, 90N
    Force applied methodThrough spring compression, manually
    Force applied probe materialStainless steel
    Handle materialNylon

    Operation steps:


    Following is excerpted from IEC 60335-2-25:2015 clause 21.101:

    Hinged doors are positioned approximately 30°before the fully open position. Sliding doors are positioned so that they are approximately two-thirds open. A force of 35N is applied to the inside surface of a hinged door at a point 25mm from its free edge or to the handle of a sliding door.

    The force is applied by means if a spring balance having a spring constant of 1.05 N/mm. It is initially applied with an opposing force applied to the other side of the door or handle. The opposing force is them removed to allow the door to complete its travel to the fully open position.

    The test is carried out five times.

    The test is repeated on doors of stationary appliances and built-in appliances except that

    the door is initially placed midway between the fully open and closed positions;

    the applied force is 1.5 times the force required to open the door or 65N, whichever is greater. However, if the force cannot be measured or if the door is opened indirectly, the 65

    N force is applied.

    The test is carried out five times.

    Doors are placed midway between the fully open and closed positions. A closing force of 90N is applied to the outside surface of a hinged door at a point 25mm from the free edge or to the handle of a sliding door, initially with the opposing force as described above.

    This test is carried out 10 times.



    Quality 1.05N/Mm Spring Constant IEC 60335-2-25 90N Spring Dynamometer for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)