IEC 61009-1 Power Load Supply for Circuit-breakers Test System

Standards & Clauses:

The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC 60898-1:2015 clause 9.11, etc.

It is used to provide adjustable load voltage, current and power factor for mechanical-electrical contact system testing. It is suitable for switching capacity and normal operating life testing of switches for household and similar fixed electrical installations. Also suitable for breaking capacity and normal operating life tests of plugs and sockets for household and similar purposes, as well as electrical stress tests for lamps and other similar tests.

Test principle: The load cabinet outputs one three-phase power supply and three-phase load input, and the load can be divided into resistive, inductive or capacitive (fluorescent lamp type) loads and three-in-one optional. Load line current: 8-130A manually adjustable, output line voltage AC: 10-400V manually adjustable. Output power factor 0.3 ~ 0.999 electric adjustable. The device has the advantages of beautiful appearance, reasonable layout and simple operation.

Features:

The load cabinet adopts an integral steel structure frame and Toyota white seal board. The upper front is the operation control panel, on which there are control power switch, product energizing current, voltage and power, power factor display instrument, load power switch, various status indicators, start and stop buttons, capacitance conversion switch, load type conversion switch and alarms etc. The lower part corresponds to the voltage output adjustment knob, current adjustment knob and inductance adjustment knob of each channel. Each load cabinet has a three-in-one function of resistive, inductive and capacitive (fluorescent lamp type) loads, which can be switched by a switch. The interior of the load cabinet adopts strong wind convection cooling. There are binding posts at the rear and lower part of the load cabinet, which can be connected with the switch plug and socket life tester through wires, and output current, voltage and power during the testing process.

Technical Parameters:

Model	SN2117C-130A
Test station	Single
Electrical Control Method	Button control, instrument display
Built-in load	Combination of three-phase resistors, reactors and capacitors
Output voltage	10 ~ 400V, accuracy ± 0.5%, digital display
Output current	10～130A, accuracy ±0.5%, digital display
Power factor	0.3～0.98, accuracy ±0.5%, digital display
Output power	0 ~ 120 kW, accuracy ±0.5%, digital display
Load mode	Resistive, inductive, and capacitive three-in-one, switchable
Capacitive load	70uf, 140uf, 7.3uf optional
Load output	Each load output and alternate load output are optional
Number of tests	0~999999 times, can be set
Load power capacity	1*125kVA
Cooling method	Strong wind cooling
Overrun alarm	The upper limit of the output current is 130A, and the output will be cut off automatically when it exceeds 135A
Dimension	1800mm×1200mm×1800mm
Weight	About 1400 KG
Power supply	Three-phase four-wire AC380/50Hz, 130KVA/station

Details Display:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.