Home > Electrical Appliance Testing Equipment >

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

Product Categories

Electrical Appliance Testing Equipment [385]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [138]
Battery Testing Equipment [75]
Switch Life Tester [276]
Led Testing Equipment [73]
Water Ingress Testing Equipment [84]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
MCB Testing Machine [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

Ask Lasest Price
Brand Name :	Sinuo
Model Number :	SN2210
Certification :	Calibration Certificate (Cost Additional)
Price :	Customized
Payment Terms :	L/C, , T/T, Western Union, MoneyGram
Supply Ability :	20 sets per month
Delivery Time :	3~5 Days

Add to Cart

Product Details
Company Profile

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

Standards & Clauses:

IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification”

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)”

Samples and Restrictions:

Household appliances, electrical accessories, lamps, etc.

Application:

To verify

a)protection of persons against access to hazardous parts inside the enclosure；

b) protection of the equipment inside the enclosure against ingree of solid foreign object.

Test Principle:

The probes as per standard figures are used to distinguish the different protection levels of the electrical enclosure. After the current or force is applied to the probe, whether the probe can contact the live parts or internal parts, to determines whether the specimen is qualified or not.

Structure:

Nylon handle + steel probe.

Optional: wiring terminals for anti-electric shock test, or M6 threaded hole at the end of the handle for connecting with push-pull force gauge

Technical Parameters:

Probe & probe code	Figure No.	Description & application mm	Forces to be applied N
Access probe A	Fig. 1	Sphere: Ф50 with handle, to verify protection of persons against access to hazardous parts or hazardous mechanical parts	50
Access probe B	Fig.2	Jointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts	10
Access probe C	Fig.3	Rod: Ф2.5 - length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts	3
Access probe D	Fig.4	Wire: Ф1 - length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts	1
Object probe 1	Fig.5	Sphere: Ф50, to verify protection of equipment against ingress of solid foreign objects with diameter≥50mm	50
Object probe 2	Fig.6	Sphere: Ф12.5,to verify protection of equipment against ingress of solid foreign objects with diameter≥12.5mm	30
Test Probe 11	Fig.7	Unjointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts	50
Test Probe 12	Fig.8	Cylinder pin: Ф4 - length 50,to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 13	Fig.9	Conical pin: Ф3 to Ф4 – length 15, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 14	Fig.10	Bar: 3×1, to verify protection of persons against access to hazardous parts or hazardous mechanical parts	20
Test Probe 17	Fig.11	Wire: Ф0.5, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 18	Fig.12	Small finger probe: Ф8.6 - length 57.9,to verify protection of children over 36 months younger than 14 years old against access to hazardous parts or hazardous mechanical parts	10
Test Probe 19	Fig.13	Small finger probe: Ф5.6- length 44, to verify protection of children younger than 36 months against access to hazardous parts or hazardous mechanical parts	10
Test Probe 31	Fig.14	Cone: Ф110/60, to verify protection of persons against access to hazardous mechanical parts	50
Test Probe 32	Fig.15	Rod: Ф25, to verify protection of persons against access to hazardous mechanical parts	30
Test Probe 41	Fig.16	Probe: Ф30, to verify protection of persons against access to hot or glowing parts
Test Probe 43	Fig.17	Bar: 50×5, to verify protection of persons against access to hot or glowing parts

Product Tags:


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Electrical Appliance Testing Equipment products from this supplier

Find Similar Products By Category:

Manufacturing & Processing Machinery

Hot Searches:

Sinuo Testing Equipment Co. , Limited

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

electrical installation test equipment

glow wire test equipment

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification