Home > Battery Testing Equipment >

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

Ask Lasest Price
Brand Name :	Sinuo
Model Number :	SN559
Certification :	Calibration Certificate (Cost Additional)
Price :	Customized
Payment Terms :	L/C, T/T, Western Union, MoneyGram
Supply Ability :	20 Sets Per Month
Delivery Time :	1 Month

Add to Cart

Product Details
Company Profile

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

IEC 62133 Cell Battery Thermal Cycling Low and High Temperature Exposure Test Chamber

Overview:

This low and high temperature cycling test equipment is mainly used for electric and electronic products, components and other materials' high low temperature test, temperature alternating, damp heat test, environment simulate reliability test, etc.

This test equipment adopts programmable high accuracy microcomputer controller, 7-inch TFT color LCD touch screen, and Intelligent software, which can achieve easy and humanized operation.

Standards Compliant:

It conforms to IEC62133:2017 clause 7.2.4, IEC62133:2012 clause 7.2.4, IEC60086-4 clause 6.4.2 etc.

Technical Parameters:

Volume & Dimension
Effective Volume	150L (can be customized)
Inner Dimension	W500 mmH600 mmD500 mm (can be customized)
Overall Dimension	W700mmH1750mmD1570mm (can be customized) Kindly remark: exact overall dimension pls refer to the final design drawing!
Performance
Condition	Air cooling type under environment temp.+5℃～+35℃, relative humidity≤85%. No load (without specimen in the testing zone)
Temp. Range	-40℃~+150℃
Temp. Fluctuation	±0.5℃
Temp. Deviation	≤±2.0℃
Temp. Uniformity	≤2.0℃
Temp. Heating Time	From -40℃ to 80℃, full range non-linear average about 5℃/mins, no load
Temp. Cooling Time	From 80℃to -40℃ , full range non-linear average about 5℃/mins, no load
Temp. Overshoot	≤±2℃
Max. Loading	No
Humidity Range	20％RH～98％RH
Humidity Fluctuation	≤±2.5%RH
Humidity Deviation	>75% RH: ≤+2, -3%RH, <75%RH:≤±5%RH
Constant Max. Heating Load	No
Temperature Humidity Control Diagraph
Noise	≤70dB(A Level)
Structure & Material
External Chamber	Adopt double electrostatic resin high temperature paint galvanized sheet.
Internal Chamber	Internal chamber with 1.2mm thick SUS#304 high &low temperature resistance stainless steel. Bottom with 2mm thick #304 stainless steel, with high strength square tube connection reinforcement , loading capacity with ≥250KG/㎡
Insulation Material	Adopt flame retardant high strength PU Polyurethane foam insulation material with thickness of 100mm, heat preservation coefficient less than 0.0212kcal/Mohr.
Chamber Door	Single open door, Door size: W500XH600mm.
Observation Window	With vacuum glass observation window (W300 xH400mm) on the door; and door frame with electric heat resistant, anti-frosting, anti-condensing devices, ensures clear observation of the specimen under testing
Testing Hole	One ￠50mm testing hole on left of the chamber, with silicon seal and stainless steel cover.
Sealing	Adopt original imported silicon rubber strip, with high sealing performance
Sample Holder	SUS#304 stainless steel sample holder, 2 layers, loading capacity: ＞50KG/layer.
Pressure Balance Port	Installed mechanical pressure close type balance device to avoid pressure difference influence the test chamber strength when do high temp. high humidity test.
Lighting Inside Chamber	With one Philip brand energy saving light (9W) inside the observation window

How is the differences of the thermal cycling test procedures between IEC 60086-4 and IEC 62133-1?

Test Procedure as per IEC 60086-4:2014 clause 6.4.2:

Test cells and batteries shall be stored for at least 6h at a test temperature of 72 ℃, followed by storage for at least 6 h at a test temperature of -40 ℃. The maximum time for transfer to each temperature shall be 30 min. Each test cell and battery shall undergo this procedure 10 times. This is then followed by storage for at least 24 h at ambient temperature.

For large cells and batteries the duration of exposure to the test temperatures shall be at least 12 h instead of 6 h.

Test Procedure as per IEC 62133-1:2017 clause 7.2.4:

Fully charged cells or batteries are subjected to temperature cycling (-20 ℃, +75 ℃), in forced draught chambers, according to the following procedure.

Step 1: Place the cells or batteries in an ambient temperature of +75 ℃ ±2 ℃ for 4 h.

Step 2: Change the ambient temperature to 20 ℃ ±5 ℃ within 30 min and maintain at this temperature for a minimum of 2 h.

Step 3: Change the ambient temperature to -20 ℃ ±2 ℃ within 30 min and maintain at this temperature for 4 h.

Step 4: Change the ambient temperature to 20 ℃ ±5 ℃ within 30 min and maintain at this temperature for a minimum of 2 h.

Step 5: Repeat steps 1 to 4 for a further four cycles. Transition from Step 4 to Step 1 within 30 min.

Step 6: After the fifth cycle, store the cells or batteries and conduct a visual check after a rest period of at least 24 h.

Product Tags:


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Battery Testing Equipment products from this supplier

Find Similar Products By Category:

Manufacturing & Processing Machinery

Hot Searches:

Sinuo Testing Equipment Co. , Limited

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test

battery charge discharge test equipment

battery discharge analyzer

IEC 62133 Battery Testing Equipment Thermal Cycling Low / High Temperature Exposure Test