| High Current Contactor | (1) Long distance connects and disconnect DC voltage to 220V. (2)Rated working current 1000A,installed with series connection
magnetic blow mediastinal plate clay arc shield arc extinguishing
system. (3) Plane layout structure, electromagnetic system and machine
contactor arc extinguishing system fixed on under frame
independently. Adopt angular rotation clapper type electromagnetic
system and double winding attracting coil, add arris pressing
device on the rotating angular. Main contactor made with red
copper. With low contact resistance, high reaction speed (4) Reliable contactor acting, safety, long service life, and easy
repair and maintenance. |
| Remote Controller | (1) Long distance wireless control; (2) Reliable and stable work, with auto- locking and interlocking
function, strong anti-interference ability, long service life. |
| Voltmeter | (1)Measuring voltage:0-100V,ensure testing accuracy； (2)Display accuracy:F.S ±0.2% rdg ±1digit； (3)Drive method:double integral method |
| Ammeter | (1)Measuring current:0-1000A and 0-500A DC； (2)Display Accuracy:F.S±0.2% rdg±1digit； (3)Drive method:double integral method |
| Standard Configuration | The battery short circuit tester consist of high current contactor,
remote controller, voltmeter, ammeter etc. |
Touch Screen Control (in English) | |
Shock Impact Test System Main Technical Parameters:
| Max. Loading Capacity | 10kg (can be customized) |
| Bench Dimension | 200mm×200mm (can be customized, cost is different) |
| Pulse Wave | Half sinusoidal wave |
| Shock Peak Acceleration | Half sinusoidal wave:150～20000m/s2 |
| Pulse Duration Time | Half sinusoidal wave: 0.6～20ms |
| Max. Shock Frequency | 80 times/min |
| Max. Shock Height | 1500mm |
| External Dimension | 1000mm×500mm×2700mm |
| Power Consumption | 2.5KVA |
| Bench Mass | 1500kg |
| Power | AC 380V±10% 3 Phase, 60Hz |
| Anti-secondary shock advice | Hydraulic Friction Braking Device |
| Working Condition | Power: AC 380V±10% 3 Phase, 60Hz |
| Environment Temp.: 5℃-40℃ |
| Relative Humidity: ≤90%(25℃) |
| Surrounding Environment: No corrosion medium, dry, good
ventilation, away from electromagnetic influence and strong
vibration source. |
Application:
This fully automatic shock test system is designed for measuring
and ensure shock performance of products and packages. It can do
normal shock test with half sine wave, square wave, sawtooth wave
etc., simulate products under real environment shock conditions,
thus improve the products and packages structure.
Feature:
1. This automatic shock test system with Windows operating system,
easy for
operation, operator only need to type into testing data, system
will automatic configurate
parameters and control machine, finish shock test accurately.
2. With anti-re-shock brake device, shock table fall freely, when
shock wave pad rebound,
hydraulic brake piston impact thus shock table braking, avoid
secondary shock and achieve accurate shock data.
3. With effective vibration damping device; for large shock tester,
when do shock testing it has large instantaneous impact force, this
device largely reduced the shock impact to the floor, small than
350×350mm ones no need special foundation, easy for installation.
4. Digital setting of shock height, shock table automatically
lifting, with high control accuracy and good repetitively.
5. Configured with shock measuring system, shock energy data and
wave with real time
display.
6. With high acceleration generator, for small testing specimens
which need high
acceleration shock test, able to fix high acceleration generator on
shock table, it can obtain
higher acceleration than IS series shock tester according to impact
energy transfer principle. For specimen smaller than 200×200mm the
testing requirements is: peak acceleration 5000-50000m/s2,
acceleration duration time 0.2~1ms.
