Aging rack structure: 6 shelves structure, 2 racks, size (length, width, height) about: W1660XD730XH1780mm is divided into 6 layers, the bottom layer is equipped with 5*4=20 E14 lamp holders, the second layer is equipped with 5*4=20 E27 lamp holders, the middle two layers are installed with 600-length LED bulbs dedicated (20 stations in each layer), the top two layers are installed with 1200mm length LED bulbs dedicated (10 stations in each layer), The second layer of each rack is the wiring summary position, which leads to the industrial circuit breaker and connects with the socket introduced by the power control cabinet. All wires, cables and terminals are made of high temperature and humidity resistant materials, and all bulb wiring is made of high temperature wire.

One power cord (2 meters) (also can be adjusted according to customer's site condition);

One overtemperature protection;

One cable hole (Φ50) (the left on equipment, equipped with stainless steel cover).

Temperature (humidity) control display, over-temperature protection setting device, lighting, switch, power switch

Adopt high-quality air duct circulation unit to achieve forced convection vertical diffusion circulation.

The air circulation adopts the design of upper air outlet and lower air return. The wind speed and air pressure meet the test standards, and the temperature stabilization time is fast at the moment of opening and closing the door.

Optimized ventilation design, strong air supply and circulation, avoid any dead angle, and make the temperature distribution in the room uniform.

More energy-saving, in line with current international and domestic environmental protection requirements.

Quieter, better to ensure a good office environment and the working environment of operators.

The extremely small tube volume and ultra-small volume ensure that the room is bright, quiet, generous and beautiful.

Easy installation, maintenance and repair.
High quality and reasonable design.

Using high-efficiency nickel-chromium heating wire

The heating system adopts the hot air circulation heating method, the temperature distribution is uniform, the system is completely independent, and the control circuit is not affected.

The output power of temperature control is calculated by microcomputer, and the heating power is automatically controlled according to the size of the internal load, so as to achieve high-precision and high-efficiency power consumption benefits, and is more environmentally friendly and energy-saving.