IEC 60068-2 Vertical Low Energy Pendulum Impact Test Device For Plugs And Sockets​

Product Overview For Vertical Low Energy Pendulum Impact Test Device:

This device is designed and manufactured according to the standard of IEC 60884-1:2022, IEC60068-2-75, and etc.

Sample: It is suitable for the mechanical strength test of electrical accessories such as plugs and sockets for household and similar purposes, surface-mounted installation boxes, threaded glands, covers, switches, etc.

Test Principle For Vertical Low Energy Pendulum Impact Test Device:

The test device is mainly composed of a pendulum whose upper end can be kept swinging in a vertical plane around its pendulum axis. The axis of the pendulum is 1000 mm above the measuring point. The pendulum consists of a rigid pendulum shaft and a compliant striking element. For heavier, bulky or difficult-to-handle test samples, a hand-held pendulum can be used for testing. This device is a low-energy pendulum impact device below 2J. It should be fixed vertically on a solid wall. The mounting bracket can be adjusted back and forth, left and right, and the impact height can be adjusted.

Technical Parameters For Vertical Low Energy Pendulum Impact Test Device:

1. Equivalent mass of impact element: 250g, 500g, 1.7Kg.

2. Position adjustment: bracket horizontal 150mm, vertical 150mm.

3. Pendulum shaft: a steel pipe with a length of 1000±1mm, an outer diameter of 9 mm, a wall thickness of 0.5 mm, and an outer diameter of 15.9 mm.

4. Swing shaft: Impact height: 65 mm, 80, 100 mm, 150 mm, 200 mm, 250 mm, 280, 400 mm scale display.

5. Install the wooden board (175*175*8mm.

6. Correspondence between drop height and energy.

Table 2 Drop height

Energy /J	0.14	0.2		(0.3)	0.35	(0.4)	0.5		0.7	1	2	5	10	20	50
Equivalent mass /kg	0.25	(0.2)	0.25	(0.2)	0.25	(0.2)	(0.2)	0.25	0.25	0.25	0.5	1.7	5	5	10
Drop height ±1%mm	56	(100)	80	(150)	140	(200)	(250)	200	280	400	400	300	200	400	500
Note 1. See Note 3.2.2; Note 2. The energy unit joule (J) in this part is derived from the standard gravitational acceleration (g), and the value of g is rounded to 10m/s².

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.