IEC 60335-1 IPX1/IPX2 Vertical Rain Drip Test System For Test Water
Ingress Protection
Product Information:
This test device is to verify Protection against Vertically Falling
Water Drops. It is designed and manufactured in accordance with the
standard requirement of IEC60529 IPX1 and IPX2, IEC60335-1 clause
15.etc.
The rise and fall of the drip box is controlled by the motor. The
electrical control cabinet is with PLC and touch screen.
1. Stainless steel fine filter for dirt filtration.
2. Adopts compressed air (compressed air should be prepared by
user) to blow out the water in the needles, to prevent water
reactive substances and atmospheric blocking needles.
3. Stainless steel general medical needle nozzles, easy to buy, not
easy to rust.
4. Needle nozzles and needle nozzle seats using taper connection,
can be easily replaced without the tool, individual damage to the
needle nozzle can be easily replaced quickly.
Features:
The IPX12 vertical rain drip test system is a specialized apparatus
used to evaluate the water ingress protection of electronic devices
or enclosures against vertically falling water drops. The IPX1 and
IPX2 ratings are part of the International Electrotechnical
Commission (IEC) standard 60529, which classifies and rates the
degree of protection provided by enclosures against the ingress of
solid objects and liquids. IPX1 and IPX2 specifically address the
device's ability to withstand dripping water. Here are the key
features and functions typically associated with an IPX12 vertical
rain drip test system:
Test Chamber: The test system includes a test chamber or enclosure
in which the device or enclosure being tested is placed. The
chamber is designed to simulate the conditions of vertically
falling water drops during the test.
Water Delivery System: The system incorporates a water delivery
system that generates and controls the flow of water drops onto the
test specimen. This system typically includes a nozzle or set of
nozzles positioned above the test specimen to ensure uniform
distribution of water drops.
Water Flow Control: The system allows for precise control of the
water flow rate and intensity of the water drops. This control
allows testing according to the specific requirements of the IPX1
or IPX2 rating.
Test Duration Control: The test system provides control over the
duration of the test. The test duration is typically specified in
the relevant standards or testing protocols, and the system allows
for precise timing and automation of the test process.
Water Recycling System: To conserve water and maintain a
sustainable testing process, some systems may include a water
recycling system. This system collects and filters the water used
during testing for reuse, reducing water consumption.
Observation and Measurement: The test system typically includes
observation windows or access ports to allow for visual inspection
of the test specimen during and after the test. Additionally, some
systems may incorporate measurement devices to assess the water
ingress and measure any water that may have entered the test
specimen.
Compliance with Standards: The IPX1~2 vertical rain drip test
system is designed to comply with the relevant standards, such as
IEC 60529. Compliance ensures that the testing process is conducted
according to established guidelines and provides reliable and
comparable results.
The IPX1~2 vertical rain drip test system is commonly used in
industries such as consumer electronics, automotive, lighting, and
outdoor equipment manufacturing. It allows manufacturers to assess
the water resistance and protection of their products against
dripping water, ensuring that they meet the required standards and
can withstand exposure to water droplets without compromising
functionality or safety.
Technical Parameters :
Item | Specifications |
Power supply of this equipment | Three phase AC380V, 50Hz, 4KW |
Power supply for test sample | Single phase AC220V, 16A |
LWGYD-4 flow rate Sensors | Flow range: 0.667-4.167 L/min, pulse output |
Small water pump | Brand: South, model no.: CHL2-40, 380VAC, 50Hz, 0.55kw Protection
class: IP55 Insulation class: F |
Waterproof test range | IPX1 test, IPX2 test, IPX1/IPX2 custom |
IPX1-IPX2 | Drip area: 1000*1000mm |
Diameter of drip hole: 0.4mm |
Distance between each two neighbor holes:20mm |
Test flow:1~1.5mm/min(IPX1), 3~3.5mm/min(IPX2) |
Test time | Set according to the test standard (range 1-9999 seconds), the unit
is: second |
Water dripping height | 200mm (automatically controlled by the test equipment) |
Water Drainage | Automatically emptying the tank water after the test is completed,
should connected with an air source (the 0.6MPa compressed air
source should be prepared by user) |
Equipment body material | Industrial aluminum alloy |
Installation method | Wall Mount |
Turntable | 1-5r/ min, can be set |
Control | PLC & 7” touch screen |
Troubleshooting:
No.: | Failure phenomenon | Reason of issue | Treatment |
1 | Turn on the power switch and the touch screen does not light up | External power supply fails | Reconnect external power supply |
Equipment MCB is disconnected | Turn on the equipment MCB |
2 | No action when the start button is pressed | The run time is not cleared | Press Count Clear |
The emergency stop switch is not reset | Reset the emergency stop switch |
Inverter alarm | Restart after power off |
3 | Little or no water from the needles | Needles are clogged | Replace the needle or remove the needle and blow through the needle
hole with airflow |
4 | Unstable flow | Air in the pipeline | Press “Dry Drip Box” in the Manual control interface to exhaust the
air, or open the vent of the water pump to exhaust the air |
