Sign In | Join Free | My himfr.com
Home > Medical Device Testing Equipment >

Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers
     
    Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers
    • Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers
    • Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers
    • Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers
    • Buy cheap Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell from wholesalers

    Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN2808
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : T/T
    Supply Ability : 10 sets per month
    Delivery Time : 30 Days
    • Product Details
    • Company Profile

    Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell


    Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell


    Product Information:


    The test device is designed and manufactured strictly according to the customer's customized requirements. It is used for the verification of the waterproof ability of the medical SSPPM shell. It is a special test equipment and is suitable for testing and certification agencies and factory laboratory testing departments.

    Equipment principle: Use the cylinder to drive the down-pressing fixture, and tightly compress the frame around the sample, so that the down-pressing fixture and the upper surface of the sample form a water storage tank. At the same time, due to the effect of two layers of sealing rubber pads, the lower surface of the sample and the lower groove of the compartment form a sealed air-filled compartment, which are divided into two inflatable compartments, one is the LCD sealed compartment area (LCD compartment), and the other is the keypad sealed compartment area (keypad compartment).

    The system controls to fill the water storage tank with water, and then automatically inflate the LCD compartment to the set pressure (monitored by the pressure sensor), and set the time at constant pressure, and observe whether there are bubbles around the LCD upper surface of the sample in the water storage tank. Then deflate the LCD compartment, re-inflate the keypad compartment, observe whether there are bubbles in the sample keypad compartment area in the water storage tank, and accurately judge the leak point.


    Technical Parameters:


    No.ItemContent
    1Input powerAC220V 50HZ, 2kW
    2ControlPLC control, touch screen operation
    3Test station1 station, can be customized
    4DriveCylinder
    5Test pressure0.01-0.5Mpa, external air source, pressure sensor monitoring and display
    6Pressure hold time0-999999s, can be set
    7Sample down-pressing fixtureCustomized according to the sample, standard 1 set
    8Fixture compartmentCustomized according to the sample, standard 1 set
    9Sealing rubber padCustomized according to the sample, standard 10 pieces (can seal the LCD compartment and keypad compartment)
    10Water injectionAutomatic switch valve

    Maintenance:

    1 Routine maintenance: disconnect the power supply when the device is not working, and keep the device clean.

    2 Regular maintenance: Regularly lubricate the bearing (lubricant can use PARKER EO-NIROMONT, etc., and perform maintenance every 3-6 months)

    3 Calibrate the pressure sensor once a year.

    4 Regularly drain the water in the air filter, and regularly add lubricating oil to the lubricant spray bottle (you can add it when the amount of lubricate oil is too low)


    Troubleshooting:


    SymptomsReasonTroubleshooting
    The power light is off

    1. Blown fuse, bad power connection.

    2. The indicator light is damaged.

    1. Check the power socket, measure the supply voltage, replace the indicator light.

    2. Replace the fuse core.

    Touch screen failure

    1. The DC power supply has no 24V voltage.

    2. The program is corrupted.

    3. The communication cable between HMI and PLC is not connected or damaged.

    1. Check DC power.

    2. Re-download the touch screen program.

    3. Replace the communication line.


    Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell



    Quality Leak Test Fixture For SSPPM Bezel For Test Waterproof Ability Of The Medical SSPPM Shell for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)