IEC 60950 Inclined Plane Ф1000mm With PLC Control For Mechanical
Stability Test
Product information:
This device complies with the standards of IEC60335-1 Clause 20.1,
IEC 60950: 2013 clause 4.1, IEC 60065:2014 clause 19.1, etc. The
test bench consists of a work surface and an angle adjustment
device, is suitable for all types of audio and video products, home
appliances, kitchen equipments and similar electrical appliances
doing mechanical stability test. The test sample was placed on the
table to test its mechanical stability performance by different
angle inclined.
Features:
The inclined plane test is a mechanical test used to evaluate the
stability and resistance to tipping over of electrical equipment.
It is commonly performed on products such as electronic devices,
appliances, and equipment to ensure their safe operation and
prevent accidental tipping.
During the inclined plane test, the equipment is placed on an
inclined surface, typically a ramp or an inclined plane, and
subjected to a specific angle of inclination. The angle of
inclination can vary depending on the applicable standard or
specific requirements.
The purpose of this test is to assess the stability of the
equipment when subjected to external forces, such as an applied
horizontal force or vibration. The test evaluates the tipping angle
or tipping threshold at which the equipment becomes unstable and
may tip over.
The test procedure typically involves gradually increasing the
angle of inclination until the equipment reaches its tipping point.
The equipment is considered to have passed the test if it remains
stable and does not tip over under the specified conditions.
The inclined plane test is significant for ensuring the safety of
electrical equipment, especially in environments where there is a
risk of accidental tipping, such as in households or workplaces. It
helps identify design flaws or weaknesses that could lead to
equipment instability and potential hazards.
The standard does include various other mechanical tests and safety
requirements for information technology equipment. These tests
evaluate factors such as mechanical strength, stability, and
resistance to external forces and impacts to ensure the safe use of
the equipment.
Technical parameters:
| Test Station | Single |
| Electrical Control Method | PLC+Touch screen control |
| Drive Mode | Motor driven |
| Countertop Diameter | Ф1000mm |
| Countertop Material | High quality sprayed steel plate |
| Angle Adjustment Range | 0-30°, electrical control, automatically achieved |
| Rotation Mode | Electrical control, automatically 1r/min |
| Bearing Capacity | 100kg |
Application:
It simulates a surface such as the floor or table, on where the
appliances intended to be used, shall have adequate stability.
Test Principle:
The appliance, not connected to the supply mains, is placed in any
normal position of use on the inclined plane at a certain angle to
the horizontal. The countertop of the inclined plane is rotated by
rotating mechanism, so as to verify the sample’s stability.
Structure:
The device consists of a countertop and an angle adjustment device
Equipment dimensions: approx.: 1000 × 1000 × 800 (mm) W × D × H
Equipment weight: 150kg
