Sign In | Join Free | My himfr.com
Home > Flammability Test Chamber >

IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers
     
    Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers
    • Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers
    • Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers
    • Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers
    • Buy cheap IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics from wholesalers

    IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN771
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : L/C, T/T
    Supply Ability : 10 Sets Per Month
    Delivery Time : 20 Days
    • Product Details
    • Company Profile

    IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics


    IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics


    Overview:


    This horizontal and vertical burning test device is used to test the flammability of plastic materials for parts of equipment and appliances. accord with IEC60695-11-3,IEC60695-11-4,IEC60695-11-10,IEC60695-11-20 And the requirements of the UL94 standard.


    The chamber has a volume of at least 0.5 m3. The combustion chamber has a large sight flow glass on the door to observe the ongoing test, and the chamber is ventilated freely, allowing normal thermal circulation of air through the test sample during combustion. The internal surface area of the box should be painted dark. When measuring with the photometer, place the box facing the rear of the box in the sample position. The luminance should be less than 20lx. For safety and convenience, the enclosure (which can be fully enclosed) is fitted with an air extraction device, such as an exhaust fan, to remove potentially toxic combustion products. The suction device can be closed during the test and opened immediately after the test to remove the fire waste water. A positive closing damper can be configured.


    Technical Parameters:


    Flames50W flame500W flame
    Standards applicationIEC60695-11-4, IEC60695-11-10, UL94IEC60695-11-3, IEC60695-11-20, UL94
    Timing device0~9999, resolution:0.1s0~9999, resolution:0.1s
    Combustion angle0°, 20°, 45°0°, 20°, 45°
    Gas pressure0.1 MPa0.1 MPa
    Height of flameTotal height 20±2mmInner flame 40±2mm total height 125
    Distance for temperature measurement10±1mm55±1mm
    Standard for blast burnerIEC60698-11-4, UL94IEC60695-11-3, UL94
    Temperature rangeMax. 1100℃, thermocouple: type KMax. 1100℃, thermocouple: type K
    Gas flow rate105 ml/min±5 ml/min965 ml/min±30 ml/min
    Water column height<10mm125mm±5mm
    Temperature rising timeFrom 100℃±5℃ to 700℃±3℃ is 44s±2sFrom 100℃±5℃ to 700℃±3℃ is 54s±2s
    Accuracy of flow rate1%1%
    Weight of copper block

    Ф5.5mm,

    1.76 g±0.01 g

    (before drilling)

    Ф9mm,

    10g±0.05 g

    (before drilling)

    Type of gasMethane or coal gasMethane or coal gas
    Volume of chamber0.75m³, black inner painted
    ControlButton operation + remote controller
    DisplayDigital display
    Using environment

    15 °C to 35 °C temperature,

    45 % to 75 % relative humidity

    Working Principle:

    According to a certain flame height and a certain flame angle, multiple flames were applied to the sample in the horizontal or vertical state, and the flammability of the sample was evaluated according to the afterflame time, afterglow time and whether the underlayer of the sample was ignited.

    IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics

    The company can provide all kinds of test equipment according to the requirements of IEC, BS, VDE, Unilever, GB, ISO and other standards, and can customize the test system or equipment according to the specific requirements of customers. We have our own senior professional technical team, and cooperate with colleges and universities, scientific research institutions, coupled with our strong manufacturing capabilities, we can provide customers with rapid response and one-stop service.


    Quality IEC60695-11-10 / 20 Horizontal And Vertical Flame Test Chambers For Plastics for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)