BS EN 12983-1 Cookware Testing Equipment For Handle Fatigue Testing

Standards for Cookware Handle Fatigue Tester:

The design of the handle fatigue resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.6 and Appendix E.

Product information for Cookware Handle Fatigue Tester:

Used for fatigue test of cooker handles. The handle assembly shall withstand 15,000 cycles without permanent deformation or loosening of the handle or connecting parts. Deformations from the end up to 5% of the total length can be ignored without compromising safety and performance.

Technical parameters for Cookware Handle Fatigue Tester:

Use method for Cookware Handle Fatigue Tester:

1. First, place the instrument in a level place on a flat table.

2. Test the specimen for resistance to heating in advance according to BS EN 12983-1 Annex B.

3. Grip the handle of the cooker with a suitable clamp.

4. adjust the "angle adjustment knob," so that the bottom of the cooker and the rising platform plane parallel, adjust the "lifting hand wheel," so that the rising platform plane from the bottom of the cooker 1mm. If some cookers are very short, and the lifting platform is more than 1mm from the bottom of the cooker after lifting to the highest position, the operator should remove the plane of the lifting platform, increase the raising rod to raise the lifting platform, and then install the plane of the lifting platform.

5. Place a 5mm thick rubber pad between the surface of the lift platform and the bottom of the cooker.

6. Place a weight that simulates the weight of the water into the cooker.

Set the counter to 150 × 100 (coefficient), press the "start" button, rotate the "speed control" button, so that the tachometer shows 25, the equipment automatically drives the cooker to reciprocate at a speed of 25 times / minute, and when it reaches 15000 times, the equipment automatically stops.

8. At the end of the test, check the cooker handle for permanent damage and the fasteners for looseness.

9. Draw conclusions after testing.

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.