IEC60068-2-32 Bottom Drop Test System Used For Larger Packaging Drop Test

Product Overview:

It complies with IEC60068-2-32. The Bottom Drop Test System is mainly used to assess the impact of the drop shock on the packaging in the actual transportation and loading and unloading process, and to assess the impact strength of the packaging in the handling process and the rationality of the packaging design.

The Bottom Drop Test System is mainly used for larger packaging drop test. The machine uses an "E" shaped fork that can move down quickly as the specimen carrier, and the test product is balanced according to the test requirements (surface, edge, Angle test). During the test, the bracket arm moves down at high speed, and the test product falls to the base plate with the "E" fork, and is embedded in the bottom plate under the action of the high efficiency shock absorber. Theoretically, the zero drop testing machine can be dropped from the zero height range, the drop height is set by the LCD controller, and the drop test is automatically performed according to the set height.

Control principle: The use of microcomputer imported electrical rational design, complete the free fall, edge, Angle, surface design.

Environmental Requirement:

1. On-site temperature: 5℃~+28℃(average temperature within 24 hours ≤28℃);

2. Relative humidity: ≤85%RH;

3. Power supply conditions: single-phase three-wire;

4. Voltage range: AC220V;

5. Frequency allowed fluctuation range: (50±0.5)Hz;

6. The grounding resistance of the PGND cable is less than 4 ohms.

7. The user is required to configure the air or power switch of the corresponding capacity for the device at the installation site, and the switch must be independent for the use of the device.

Main Technical Parameters:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.